Computer will boot up but no signal to the monitor also the USB Ports will not work.? - advanced usb port monitor activation
One day I woke up and decided to open my computer, but would miss if forcively restart my computer. The next thing I know, the team gets no signal on the screen, but still to start. The USB ports do not even give us the power to my keyboard, mouse or something. There is a problem thread, I think there might be a fried motherboard or CPU, graphics card, maybe. I watch my mother because USP ports not working im sooo lost. I wonder what that means. Thank you in advance for the answers!
Saturday, January 30, 2010
Advanced Usb Port Monitor Activation Computer Will Boot Up But No Signal To The Monitor Also The USB Ports Will Not Work.?
Subscribe to:
Post Comments (Atom)
7 comments:
What do you mean by "Open My Computer"? You mean you opened the box and played indoors?
If so, could you friends with the motherboard with static electricity. You have to be careful when touch-sensitive electrical components can be on a computer, the minimum load discharge damage or destruction. Wear ESD safety.
Try starting in Safe Mode. When booting, press F8. It will give you the choice between three different boot options. Choose Safe Mode with Networking. Next, make sure you have all the drivers available.
It seems that your mother does not transmit a signal power or one of its aircraft, which is probably the best way to get a new motherboard if you're willing to spend much time configuring the motherboard, PS / 2
It seems that your mother does not transmit a signal power or one of its aircraft, which is probably the best way to get a new motherboard if you're willing to spend much time configuring the motherboard, PS / 2
(1) If you try, it does not after restarting in Safe Mode ... GDP is the machine? If so, how often does it beep? the number of times you can use to determine the general area of the problem --
(2) Try the Escape key after hearing a beep, press and see if the boot sequence continues. (my machine does that).
Did you do any hardware change? Nothing has been disconnected when you start your computer. You can not just detach and reattach your hardware. Once you drag with the mouse and started my computer and I was very confused. After I replug the mouse, I did a system restore, the problem has been resolved.
Hopefully, this is not the motherboard, you can check the feed on your computer, whether it might not give enough power first. Pop the case and try a power outage or a bright light on the motherboard have during the boot. if it slowly in and out, the juice is not enough to achieve. If you clear as day and it seems that you might be good start, then the motherboard or simply re-install all the drivers. Good luck with that!
Post a Comment